Lasts & Sizing

Buy with confidence! You don't need to hesitate about the size you choose, however we will reconfirm the size after the order is received. That confirmation is done before we go on production, so you can still change the order details at that time.

STEP 1 - Find Your Foot Length

There are 2 ways to find the length and width of your feet, using the Brannock Size or taking your foot measurements. There is no harm in doing both for double checking, please follow the exact steps below:

A. Brannock Size Method

Brannock Size is the size you get by using the Brannock Device, not using the size chart and also not the size you normally wear. You can find these device at your local shoe store, just ask for a measurement to them and it’s free!

Simply guidelines when taking the measurement:

Take measurements on the Brannock Device for both of your feet.
Take measurements while standing by distributing your body weight as comfortably as possible.
Don’t wear socks.
Have someone help you do this, so you don’t move while the measurement is being taken.
After you get your Brannock Size, convert the size into your foot length in centimeter units using the comparison chart below:

B. Foot Measurement Method

This is the most simple and quickest method to find out your foot dimensions at home with just a few props:

You need to measure the Foot Length and the Foot Width for both of your feet. Please refer to the picture-1 below to know which part is the Foot Length & Foot Width.
Before starting, pay attention to the picture-2 below regarding how the measurement should be done. We don’t use the tracing method, the method is only by marking the two ends of the foot length and the two ends of the foot width.
Prepare:
- Two sheets of paper, should fit your entire foot;
- Ruler, NOT a tape measure;
- Pencil or pen.
You can follow step-by-step after this point or follow video tutorial below:
- Video Tutorial: https://youtu.be/TgToskS9cdA
- Stand straight on the paper with your weight equally distributed on both legs, stand on a hard surface, and be barefoot (don’t wear socks).
- Ask someone to help you make perpendicular lines on the heel and toe using a ruler and pen. Look at the two pictures for more details.
- Do the previous step, but for both ends of the foot width.
- Measure the two distances in centimeter to get your Foot Length & Foot Width.
- Take these measurements several times for both of your feet to make sure you don’t make mistakes.

STEP 2 - Find Your Perfect Size!

Buy with confidence!
1. Hornady Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Balmoral Boots, Balmoral Oxford Boots, Gunner Boots, & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Nosler Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Balmoral Boots, Balmoral Oxford Boots, Gunner Boots, Ivories Boots, Derby Shoes & Ivories Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Barnes Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Winchester Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Bonded Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Ivories Boots, Derby Shoes, & Ivories Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Moc Last is applicable for article: Moc Toe Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Mandrill Last is applicable for articles: Monkey Boots & Tamarin Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Macaca Last is applicable for articles: Monkey Boots & Tamarin Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Slipper Last is applicable for article: Wholecut Slippers.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Hornady Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Balmoral Boots, Balmoral Oxford Boots, Gunner Boots, & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Nosler Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Balmoral Boots, Balmoral Oxford Boots, Gunner Boots, Ivories Boots, Derby Shoes & Ivories Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Barnes Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Winchester Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots & Derby Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Bonded Last is applicable for articles: Field Boots, Service Boots, Logger Boots, Officer Boots, Ivories Boots, Derby Shoes, & Ivories Shoes.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production.

Buy with confidence!
1. Moc Last is applicable for article: Moc Toe Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Mandrill Last is applicable for articles: Monkey Boots & Tamarin Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Macaca Last is applicable for articles: Monkey Boots & Tamarin Boots.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production

Buy with confidence!
1. Slipper Last is applicable for article: Wholecut Slippers.
2. Make sure you have followed STEP-1 above. Using the Brannock Size is recommended, but it never hurts to double check by also taking measurements.
3. If you’re in a size between, try to size-up for a relaxed fit or try to size-down for a snug fit.
4. If you have E, EE or other wide feet, please indicate your wide foot measurements on the notes when you put the order.
5. Anyway, you don’t need to worry about your size choice. We will double check the size and make sure other details are good before we proceed with production